13. Projector Control
Image 13-55
Network, wireless
Image 13-56
Wireless default gateway
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select Subnet M ask and press ENTER to activate the input box.
Image 13-57
Wireless default gateway, input
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can b e entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be s elected automatically.
13.6 IR Control switching
What can be done ?
Each IR receiver inside the projector can be activated or deactivated. When an IR receiver is deactivated, no IR signal sent to this
IR receiver will be processed.
How to activate or deactivate
1. Press Menu to activate the menus and select Projector Control → IR control.
R5905032 HDX SERIES 20/11/2014
237
To Next Page
Loading...
