Barco HDX - Reset Formatter; Refill Mode

14. Service
14.8 Reset Formatter
Why and when
A reset formatter is necessary when e.g. a color is missing, artifacts are visible in the image or image is frozen and the formatter
test patterns cannot be displayed.
How to reset
1. Press Menu to activate the menus and select Service → Reset Formatter.
Image 14-63
Main menu, service
Image 14-64
Service, reset formatter.
2. Press ENTER to select. Use the ▲ or ▼ key to select Yes.orNo and press ENTER.
Image 14-65
Reset formatter
If you want to reset the formatter, select Yes.
If you do not want to reset the formatter, select No.
14.9 Refill mode
Before selecting Refill mode, take first all preparations necessary to refill the cooling circuit.
What can be done?
When all necessary preparations are taken, the refill mode activates automatically the refill process.
For more information about the refill process, consult the Service manual.
How to start the refill mode
1. Press Menu to activate the menus and select Service → Refill Mode.
R5905032 HDX SERIES 20/11/2014
285