16. Servicing
1
Image 16-13
4. At the same time, take out the filter.
Clean the dust filter
1. Remove most contamination with a vacuum cleaner.
2. Blow remaining dust away with compressed air in an other room or outside.
If you cannot clean the filter anymore, insert a new one.
How to install
1. Pull the bottom holder to the front and inse
rt the filter.
2. Fasten the thumb screw (1).
CAUTION: Never use the projector with removed filters !
R5905032 HDX SERIES 20/11/2014 303
To Next Page
