5. Getting started
• number of Strikes
• Run time in hours
• Remaining run time in hours
• slide bar indication with percentage indication of the current run time, compared with the maximum life time of the lamp.
Software overview
Once the projector is started, press About to get an overview of the software versions such as :
Image 5-5
Local screen, about
• Package version
•Mgrsoftware
• GUI software
Starting image projection via the standby key.
1. Press Stand by key once on the local keypad or on the remote control.
R5905032 HDX SERIES 20/11/2014 59
To Next Page
