11. Lamp
Image 11-16
Auto dimming no signal
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
11.7 Auto dimming when Over-temperature
What can happen?
When an over-temperature is detected, the projector starts dimming the lamp so that the projector can cool down.
How to set up
1. Press Menu to activate the menus and select Lam p → Power → Auto Dimming O vertemperature.
Image 11-17
Main menu, lamp
Image 11-18
Lamp, power
158 R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
