Barco HDX - Wired Subnet Mask Set up

13. Projector Control
Image 13-20
2. Use the ▲ or ▼ key to select IP Addres s under Wired and press ENTER to activate the input box.
Image 13-21
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can b e entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be s elected automatically.
13.5.4 Wired subnet mask set up
Subnet for Wired and Wifi must be different !
How to set up
1. Press Menu to activate the menus and select Projector C ontrol → Network.
226
R5905032 HDX SERIES 20/11/2014