Barco HDX - Lamp Identification and Z-axis Adjustment

11. Lamp
Image 11-28
LPS power
11.11 Lamp identification
About
The lamp identification menu gives an overview of the most important parameters of the used lamp.
These parameters are:
• Serial number of the lamp
• Article number of the lamp
• Run time since first start up of the lamp
• Remaining run time for a safe operation of the lamp
• Number of strikes since the first start up of the lamp
• Software version
These parameters are useful in case of a service request.
How to display
1. Press Menu to activate the menus and select Lamp → Identification.
Image 11-29
Main menu, lamp
Image 11-30
Lamp, identification
2. Press ENTER to select.
162
R5905032 HDX SERIES 20/11/2014