13. Projector Control
Image 13-87
DMX shutdown
2. Press ENTER to toggle between [On] and [Off].
[On] : projector goes in shutdown after a certain retarding time.
[Off] : projector does not go in shutdown.
13.7.8 DMX Shutdown retarding time
About the shutdown retarding time
The retarding time is the time between no DMX is detected and the moment that the projector shuts down.
How to set the retarding time
1. Press Menu to activate the menus and select Projector Control → DMX → Shutdown Time .
Image 13-88
Main menu, projector control
Image 13-89
Projector control, DMX
R5905032 HDX SERIES 20/11/2014 247
To Next Page
Loading...
Need help?
General
