Need help?Do you have a question about the Barco HDX W20 and is the answer not in the manual?
Essential guidelines for safe operation and installation, covering warnings and cautions.
Detailed instructions to prevent electrical shock and personal injury, including warnings about high voltage and moving parts.
Specific safety guidelines for handling and stacking HDX rental flight cases to prevent damage and injury.
Specifies environmental conditions (temperature, humidity, altitude) and cooling needs for projector operation.
Step-by-step guide on how to safely unpack the projector and its accessories.
Details on installing batteries, rugged case, and XLR adapter for the projector's remote control.
Information on available lenses, selection criteria, installation, removal, safety cables, and adjustments.
Details DVI, 3G/HDSDI, and optional 5-cable input specifications and connectivity.
Describes DMX, XLR, RS232/RS422, USB, and Ethernet for projector control.
Information on the projector's outlet for connecting DMX accessories or external power.
Explains how to control the projector using the remote control unit (RCU) and the local keypad.
Guide on powering on, switching to standby, and safely powering off the projector.
Details on setting projector addresses and selecting input sources for display.
Guide on navigating the menu structure and making adjustments to settings using the controls.
How to display internal test patterns and access help information for menu items.
Overview of input settings and step-by-step guide to select the desired input source.
Configuration options for various input types including DVI, SDI, and HDMI/DisplayPort.
Settings for no signal conditions and Extended Display Identification Data (EDID) configuration.
Details on 3D modes, activation, auto detection, input types, and second input selection.
A table outlining the Image menu structure and key adjustment parameters.
How to set the aspect ratio and configure source timings for optimal image display.
Managing image files, including loading, renaming, deleting, and copying custom settings.
How to enable or disable a custom splash image displayed during projector startup.
Settings for the main display window, including source selection, size, and position.
Configuration for the PiP window, covering activation, source, size, and position.
Management of layout files, including loading, renaming, deleting, and copying custom layouts.
How lens settings (zoom, focus, shift) are applied when switching between custom layouts.
How to switch between Normal, Economic, and Long Life modes to manage lamp output and lifetime.
Enables automatic reduction of lamp power during pause, no signal, or over-temperature.
Forces constant light output over time by adjusting lamp power to compensate for aging.
Provides lamp details and guides on readjusting lamp position for optimal performance.
Defining projector orientation and adjusting lens zoom, focus, shift, and mid-position.
Introduction to image warping for distortion compensation and activation/deactivation.
Adjusting blanking for framing and settings for contrast and intensity enhancement.
Adjusting gamma, selecting internal patterns, and configuring color space for image quality.
Overview of Scenergix for multichannel setups, enabling image blending for a single-view appearance.
Settings related to 3D glasses synchronization, including dark time and L/R output reference delay.
Setting individual/common addresses and configuring serial communication (RS232/RS422).
Setting up wired or wireless network connections, including DHCP, IP address, and subnet mask.
Configuration of DMX settings including address, universe, mode, Art-Net, and output voltage.
Setting up automated tasks and configuring the projector's GSM module for SMS notifications.
Controlling light output and managing SMS services for notifications and information.
Displays general projector information and provides diagnostic overviews like versions and measurements.
Selecting internal patterns and adjusting RGB convergence for precise image alignment.
Restoring factory settings and managing custom settings via USB memory.
Steps to reset the formatter and activate refill mode for the cooling circuit.
Enabling special modes and automatic lamp dimming for over-temperature protection.
Procedures for safely cleaning projector lenses to protect optical coatings and prevent scratches.
Instructions for cleaning the projector's housing using a damp cloth and mild detergent.
Step-by-step guide on how to safely install a new input module into the projector.
Procedure for safely removing and installing the projector's lamp house.
Steps for removing and mounting the projector's front and lamp covers.
Guide on replacing high density dust filters and removing/cleaning metal front filters.
Technical drawings and measurements detailing the physical dimensions of the HDX projector.
Detailed technical specifications for the HDX W12, W14, W18, and W20 FLEX projector models.
A table listing pre-programmed standard image files and their technical parameters.
Details DMX channels, values, default settings, and actions for basic DMX control.
Outlines DMX channels, values, and actions for full DMX control, including brightness and contrast.
Provides DMX channel information for extended control features like lens adjustment and lamp power.
Instructions on how to mount the necessary stacking points for securing projectors in a stacked configuration.
Guidelines for stacking projectors safely in table or ceiling configurations, including maximum unit limits.
Procedures for aligning stacked projectors using internal hatch patterns for accurate image placement.
Guidance on the proper disposal of waste electrical equipment and product batteries according to regulations.
Information regarding China RoHS compliance and the content of hazardous substances in components.
Lists the manufacturing addresses for Barco NV and Barco Visual (Beijing) Electronics Co., Ltd.
To Next Page
General
