Barco HDX W20 - Auto Dimming When Over-Temperature

14. Service
Image 14-72
Main menu, service
Image 14-73
Service, special HD camera mode
2. Press ENTER to toggle between [On] and [Off].
14.12 Auto Dimming when over-temperature
What can happen?
When an over-temperature is detected, the projector starts dimming the lamp so that the projector can cool down.
How to activate - deactivate
1. Press Menu to activate the menus and select Serv ice → Auto Dimm ing whe n Ove rtemperature.
Image 14-74
Main menu, service
Image 14-75
Service, auto dimming when over-temperature
2. Press ENTER to toggle between [On] and [Off].
[On] : Dimming is started when an over-temperature is detected.
[Off] : No dimming is started when over-temperature is detected.
288
R5905032 HDX SERIES 20/11/2014