Barco HDX - Wired IP Address Set up

13. Projector Control
Image 13-17
Wired DHCP
2. Use the ▲ or ▼ key to select D HCP under Wired and press ENTER to toggle between [On] or [Off].
[On] : DHCP is activated. An automatic IP address is assigned.
[Off] : DHCP is deactivated. A fixed address must be used.
13.5.3 Wired IP address set up
How to set up
1. Press Menu to activate the menus and select Projector C ontrol → Network.
Image 13-18
Main menu, projector control
Image 13-19
Projector control, network
R5905032 HDX SERIES 20/11/2014 225