9. Image
9.8 Splash image
About a splash image
When splash image is on, a dedicated image is displayed after start up and before the normal image is displayed and that for a
certain time.
A splash image can be uploaded via Projector Toolset. For more information about uploading a splash image, consult Projector
Toolset’s user guide.
Enable or disable the splash image
1. Press Menu to activate the menus and select Image → S plash image
Image 9-97
Main menu, Image
Image 9-98
Image, splash image
2. Select S p lash image .
Image 9-99
Splash image, enabling
3. Press ENTER to toggle between [On] or [Off].
On A splash screen will be displayed at each startup for a certain time (time out)
Off
No splash screen is displayed at startup
Time-out setup
1. Press Menu to activate the menus and select Image → S plash image
Image 9-100
Main menu, Image
Image 9-101
Image, splash image
2. Select Timeout(sec)
132
R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
