9. Image
Image 9-92
Image file services, Options
Image 9-93
File options, Auto Picture Alignment
2. Press ENTER to toggle between [Off], [Always] or [Load File].
- Off : auto picture alignment deactivated.
- Always : auto picture alignment is always activated.
- Load file: when new file is loaded for the selected source.
9.7 Save custom settings
What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector lamp
was switched off.
When settings are changed when the lamp is off, a manual Save custom settings must be executed to save the changes.
When the message Save changes is displayed, newer switch off the projector.
How to save
1. Press Menu to activate the menus and select Image → Save Custo m Settings
Image 9-94
Main menu, Image
Image 9-95
Image, save custom settings
2. Use the ▲ or ▼ key to select Yes and press ENTER.
Image 9-96
Save custom settings, question
R5905032 HDX SERIES 20/11/2014 131
To Next Page
Loading...
