Barco HDX - Wireless Fixed IP Address Set up

13. Projector Control
Image 13-41
Network, wireless
Image 13-42
Wireless, DHCP
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select DHCP and press ENTER to toggle between [O n] or [Off].
[On] : Wireless DHCP is activated. An automatic IP address is assigned.
[Off] : Wireless DHCP is deactivated. A fixed address must be used.
13.5.9 Wireless fixed IP address set up
Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup .
Image 13-43
Main menu, projector control
Image 13-44
Projector control, network
R5905032 HDX SERIES 20/11/2014 233