13. Projector Control
Image 13-52
Wireless Subnet Mask, input
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can b e entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be s elected automatically.
13.5.11 Wireless default gateway set up
Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Projector Control → Network → Wireless Setup .
Image 13-53
Main menu, projector control
Image 13-54
Projector control, network
236 R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
Need help?
General
