10. Layout
Image 10-29
PiP window, size
2. Press ENTER to select.
The Size window opens.
Image 10-30
PiP window, resize
3. To keep the current aspect ratio, press ENTER to check Lock.
Once Lock is checked, the width and the height will follow each other when changing one of the dimensions.
4. Use the ▲ or ▼ key to change the height and the ◄ or ► key to change the width.
5. When the desired size is reached, press EXIT.
A Sa ve Layout window opens.
Image 10-31
Save layout
6. Use the ▲ or ▼ key to select Yes and press ENTER to save.
Select No if you want to quit without saving the current position.
10.4.5 PiP window, position
What can be done?
The picture in picture window can be positioned on any place on the display just by changing its start coordinates. The reference is
the upper left corner of the window.
How to position
1. Press Menu to activate the menus and select Lay out → PiP window → Position.
R5905032 HDX SERIES 20/11/2014
143
To Next Page
Loading...
