12. Alignment
Image 12-27
Main menu, alignment
Image 12-28
Alignment, Warping
Image 12-29
Warping, Warp adjust
Image 12-30
Warp area
Warp adjust menu, general icons
1 2 3 4 5 6 7
Image 12-31
1
Undo / redo icon
2
Grid initialization (reset grid to original)
3
Increase the number of points. The current number of points (mode) is indicated with a digit inside the icon. By default 3
points are shown.
4
Reduce the number of points. The current number of points (mode) is indicated with a digit inside the icon.
5
Remove / show grid
6
Remove / show points
7
Hardware reset of warp module
12.8.4 Warp adjustment principle
Description
Warping adjustment enables the relocation of pixel groups in an image in order to introduce spacial distortion. To make the
procedure comprehensible, there are some rules and features.
174
R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
