14. Service
Image 14-58
USB memory selection
2. Select Save Custom Settings and press ENTER to download this set.
Note: Make sure a formatted USB stick is inserted in the USB c onnector.
When no USB stick is available, a message will be s hown: No US B dev ice is found.
The name of the custom settings files contains the serial number of the projector from which ti is downloaded.
Load custom settings
1. Press Menu to activate the menus and select Service → USB M emo ry.
Image 14-59
Main menu, service
Image 14-60
Service, USB memory
Image 14-61
USB memory selection
2. Select Load Custom Settings and press ENTER.
An overview of the available sets of custom settings is given.
Image 14-62
Custom settings files
3. Select a set and press ENTER to upload this set.
284
R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
