13. Projector Control
Image 13-77
Front XLR Output voltage enable
2. Press ENTER to toggle between [On] and [Off].
[On] : Front XLR Output voltage enabled.
[Off] : Front XLR Output voltage disabled.
Output voltage level setup
1. Press Menu to activate the menus and select Projector Control → DMX → O utput voltage level.
Image 13-78
Main menu, projector control
Image 13-79
Projector control, DMX
Image 13-80
Front XLR output voltage level
2. Press ENTER to toggle between [0 Volt], [9 Volt], [12 Volt] and [24 Volt].
244
R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
