Need help?Do you have a question about the Barco Balder Series and is the answer not in the manual?
Essential safety warnings, electrical precautions, and fire hazard prevention.
Laser safety, hazard distances, safety symbols, and disposal guidelines.
Compliance with RoHS standards and essential contact details for support.
Identification of projector parts, status indicators, and LCD panel functions.
Setup and operation of the remote control, including battery and protocol settings.
Description of projector address, connector panel, and various input/output ports.
Steps for connecting sources, powering up/down, and managing power modes.
Navigating the OSD, customizing settings, and updating projector firmware.
Guidelines for cleaning projector lenses, cabinet, and filters.
General RG3 safety, installer responsibilities, and required user training.
Precautions for high brightness, hazard distances, and controlling the laser beam.
To Next Page
General
