Barco Balder Series User Manual

601–0443 /03 Balder 13
Image Description
For North America, this projector may become RG3 when an interchangeable lens with throw ratio
greater than 6.0 is installed. Refer to the manual for the lens list and hazard distance before operation.
Such combinations of projector and lens are intended for professional use only, and are not intended
for consumer use.
This projector may become RG3 when an interchangeable lens with throw ratio greater than 4.7 is
installed. Refer to the manual for the lens list and hazard distance before operation. Such
combinations of projector and lens are intended for professional use only, and are not intended
for consumer use.
Ce projecteur peut devenir un projecteur RG3 en cas d'installation d'un objectif interchangeable
dont le r
apport de projection est supérieur à 4.7. Veuillez vous reporter au manuel pour en savoir
plus sur la liste des obje
ctifs et la distance de sécurité avant toute utilisation. De telles combinaisons
entre projecteur et objectif sont conçues pour des applications professionnelles uniquement et pas
pour des applications grand public.
4.7 RG3
“Risk Group 3 Safety”, page 47 , and
chapter “Lenses” in user manual
Caution! With Interchangeable lens
with throw ratio greater then 4.7,
consider hazard distance and
installation requirements for RG3
product. Refer User manual.
Balder FDA Label
THIS PRODUCT IS IN CONFORMITY WITH
PERFORMANCE STANDARDS FOR LASER
PRODUCTS UNDER 21 CFR 1040, EXCEPT
WITH RESPECT TO THOSE CHARACTERISTICS
AUTHORIZED BY VARIANCE NUMBER
2016-V-0144 EFFECTIVE MARCH 6, 2017.
Balder EMC label
This is a class A product. In a domestic environment this product
may cause radio Interference in which case the user may be
required
to take adequate measures.
This device complies with part 15 of the FCC Rules, Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This C
lass A digital apparatus complies with Canadian ICES-003, / Cet appareil numerique
de Ia
classe est conforme à Ia norme NMB-003 du Canada.
EMC:
FC
C:
CANADA:
IEC EN 60825-1
CL
ASS 1 LASER PRODUCT
RG2 IEC EN 62471-5
Location of Safety Label
Warning and EMC labels
Image 1-1: Balder Projector
CAUTION: This product contains chemicals, including lead, known to the State of California to
cause birth defects or other reproductive harm. Recycle properly, do not dispose of in ordinary
waste!
1.5 Disposal Information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste
from electrical and electronic equipment, this product must not be disposed of with other municipal waste.
Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. To prevent possible harm to the environment or human health from
Safety

Barco Balder Series Specifications

General

Brand	Barco
Model	Balder Series
Category	Projector
Language	English