Need help?Do you have a question about the Barco UDX Series and is the answer not in the manual?
General| Light Source | Laser Phosphor |
|---|---|
| Connectivity | 3G-SDI, HDBaseT |
| Dimensions | Varies depending on the model |
| Weight | Varies depending on the model |
| Power Consumption | Varies depending on the model |
| Warranty | 3 years |
| Lens Options | Multiple interchangeable lenses |
Safety precautions for handling the projector and its components.
Detailed instructions to prevent electrical shock and personal injury.
Identifies and explains various safety symbols and labels on the projector.
Explains laser safety zones and exposure limits to protect eyes and skin.
Details safety considerations for rear projection setups and restricted areas.
Shows how lens modifications affect hazard distance calculations.
Step-by-step guide for inserting batteries into the remote control unit.
Instructions on selecting the correct communication protocol (RC5 or NEC) for the remote.
Explains the function of the remote control's power button for battery saving and activation.
Provides a numbered list and diagram of all buttons on the remote control unit.
Details the different flashing patterns of the indicator light on the remote control.
Describes how to use the RGB filter button for color adjustments during installation.
How to set up projector addresses and broadcast addresses for the remote control unit.
Instructions on connecting the remote control via XLR for wired operation.
Instructions on connecting the remote control via a mini-jack connector.
How to install the optional protective silicone sleeve for the remote control.
Overview of the projector's input and communication ports and modules.
Explains the functions of the projector's physical keypad and its LCD panel.
Details the various communication ports like LAN, DMX, RS232/RS422, and USB.
Describes the capabilities and usage of the Mark II Quad Combo input board.
Details the features and limitations of the older Mark I Quad Combo input board.
Explains the specifications and usage of the Quad DisplayPort 1.2 input board.
Information on connecting 12G SDI over fiber using the SFP input board.
A guide to understanding the status indicators on the projector's buttons and LEDs.
Step-by-step instructions for safely removing an input module from the projector.
Detailed procedure for installing new input or communication boards into the projector.
Overview of control methods including local keypad, remote control, and browser application.
Guide on how to power on the projector and understand its startup status.
Steps to select and display a video source after powering on the projector.
Instructions for putting the projector into standby mode and the cooling cycle.
Steps to completely power off the projector after it has been put in standby.
How to operate the Remote Control Unit (RCU) via IR or hardwired connection.
Explanation of projector addresses and broadcast addresses for individual and group control.
Details on why projector addresses are needed and how to set them up.
How to quickly select sources and test patterns using direct access features.
Instructions for updating the projector's firmware via network or USB.
Introduction to the Status Screens and Main Menu overview of the projector's GUI.
How to navigate the On-Screen Display (OSD) menus using the remote or keypad.
Guide on how to use internal and output test patterns for image adjustment and verification.
Menu for selecting, reviewing, and configuring video sources for the projector.
Steps to select and display a single video input source on the projector.
How to configure and display multiple sources as a single stitched image.
How to configure settings like Color Space, Signal Range, and EDID for each input connector.
Menu for adjusting image parameters such as brightness, contrast, sharpness, and color.
Adjusting contrast, brightness, and saturation of the projected image.
How to modify the sharpness setting to improve image clarity.
Fine-tuning the gamma curve to enhance image richness and detail.
Selecting different gamma types like sRGB, DICOM, or AUTO for specific applications.
Using digital zoom and shift features to adjust the projected image position and size.
Advanced color calibration using custom RGB, RGBCMY, or White point settings.
How to select the optimal output resolution for 4K UHD or WQXGA images.
Configuring the projector to display High Dynamic Range content using PQ settings.
Fine-tuning the projected image by adjusting the lens zoom and focus.
Adjusting the vertical and horizontal lens shift for precise image positioning.
Forcing the lens to return to its center position for calibration.
Using the laser range finder to measure distances for projector positioning.
Controlling the motorized rigging frame for vertical and horizontal movement.
Setting the projector's physical installation orientation (e.g., front/ceiling, rear/table).
Digitally manipulating the image to compensate for screen distortions or create custom shapes.
Creating seamless transitions between projectors by adjusting light intensity in overlap zones.
Adjusting laser power output and enabling Constant Light Output (CLO) mode.
Configuring the projector to use internal, external, or mixed cooling systems.
Selecting how the image is fitted to the screen (Fill Aspect, 1:1, Fill Screen, Stretch).
Setting up and configuring the projector for active stereoscopic 3D image display.
Explains the difference between active and passive stereo 3D and projector compatibility.
Steps required to set up a 3D projection system, including source and emitter connection.
Details connection methods for 3D sources using Quad Combo and DP 1.2 input cards.
Selecting the output mode (AutoStereo, Mono, ActiveStereo) for 2D and 3D content.
Configuring 3D emitter settings like Swap Eye, Dark Time, and Sync Delay.
How to save current projector settings as a profile for later use.
Assigning saved projector profiles to specific presets for quick recall.
Steps to remove unwanted projector profiles from the system.
Configuring network settings for wired and wireless connections.
Managing broadcast address, projector address, and IR sensors for remote control.
How to assign a custom hostname to the projector for easier network identification.
Configuring DMX settings for lighting control, including address, mode, and Art-Net.
Enabling and setting the output voltage for the front XLR connector, used for peripherals.
Setting up the projector with a SIM card by entering the PIN code for communication.
Changing the visual theme of the OSD display between light and dark modes.
Selecting preferred units for temperature (°C/°F) and distance (meters/feet).
Preventing the projector from automatically entering standby mode for continuous operation.
Enabling or disabling specific lens functions like focus, shift, and zoom.
Adjusting the brightness of the LCD display and enabling Stealth Mode.
Resetting projector settings to factory defaults, either individually or entirely.
Calibrating lens functions such as focus, shift, and zoom for optimal performance.
Locking light output to specific levels using Flex codes and license files.
Calibrating the rigging frame's horizontal shift, vertical shift, and rotation.
Adjusting the alignment of red, green, and blue image components for optimal convergence.
Accessing hidden settings menus like Color, Statistics, and Laser Banks.
Adjusting native color settings and performing P7 calibration for precise color reproduction.
Viewing projector statistics such as laser runtime, strikes, and uptime.
Monitoring the operational status and identifying failures in the projector's laser banks.
Provides an overview of the information displayed in the projector's status menu.
Detailed instructions and tools for cleaning the projector lens to maintain image quality.
How to clean the projector's housing using a damp cloth and mild detergent.
Detailed technical specifications for the UDX-4K40 projector model.
Detailed technical specifications for the UDX-4K32 projector model.
Detailed technical specifications for the UDX-4K22 projector model.
Detailed technical specifications for the UDX-W40 projector model.
Detailed technical specifications for the UDX-W32 projector model.
Detailed technical specifications for the UDX-W26 projector model.
Detailed technical specifications for the UDX-W22 projector model.
Detailed technical specifications for the UDX-U40 projector model.
Detailed technical specifications for the UDX-U32 projector model.
Provides the physical dimensions of the UDX projector in millimeters.
Shows the dimensions of the optional rigging frame for projector mounting.
Displays the dimensions of the flight case used for transporting the projector.
Lists various certification marks and regulatory compliance symbols.
Guidance on the proper disposal of the product and its batteries according to EU directives.
Statement regarding Turkey's compliance with RoHS regulations for electronic equipment.
Provides contact details for Barco and information on finding local importers.
A comprehensive table listing compatible signals across various resolutions and refresh rates.
Details video timing formats supported by SDI inputs, including HD-SDI, 3G-SDI, and 12G-SDI.
Lists video timing formats and 3D support for HDMI 2.0 inputs.
Video timing formats and 3D support for DisplayPort 1.2 inputs, including various layout modes.
Video timing formats supported by HDBaseT inputs, including available layout modes.
Illustrates the location of input boards (L1, L2) relevant for DMX chart configurations.
Basic DMX channel mapping for functions like shutter, intensity, and input selection.
Extended DMX channel mapping for advanced control, including lens and light source adjustments.
To Next Page
