R5906112 /09 UDX series 175
10.12 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
Option Setting Factory setting
DMX DMX Mode Basic
Start Channel 1
Illumination Power 100%
ImageBlend Blend/Mask size
Black Level
Disabled, all value to zero
Black Level Files
Blend Files
Disabled, all files deleted
ImageConnector Color Space auto
Signal Range auto
ImageConvergence Electronic Convergence All values to zero
ImageDisplay Display mode AutoStereo
ImageFeatures Contrast mid value
Brightness mid value
Saturation mid value
Sharpness mid value
Gamma mid value
Cropping Off
Aspect Ratio 16:9
Scaling Fill Aspect ratio
ImageOrientation Orientation Table, Front
ImageRealColor P7 Realcolor all set to native
ImageResolution Output Resolution (if applicable) 4K UHD
ImageSource Source files Standard
ImageStereo Sync delay 0 µs
Swap eye Off
Dark time lowest value available
ImageTestPattern Test Pattern Off, none selected
ImageWarp Screen size 5120x3200 / 2560x1600
4 corner
Bow
Warp disabled, no warp
Warp files Disabled, all warp files deleted
Network Communication LAN, Automatic settings
GUI – System Settings
To Next Page
Loading...
Need help?
General
