R5906112 /09 UDX series158
10.1.3 Wireless IP address set up
When can the wireless IP address be used?
When the optional WiFi module has been installed on the projector, you can configure the projector in such a
way it can access the network via WiFi instead of a LAN cable.
For more information on how to install the WiFi module, please refer to the installation manual.
How to connect to a wireless network?
1. In the main menu, select System Settings → Communication → WiFi.
Image 10-5: Communication menu, WiFi
The WiFi menu is displayed.
Image 10-6: WiFi menu
2. Put the upper switch to the right to enable the WiFi module. The color of the switch becomes blue.
3. Make sure the second switch is set to the right (automatic).
Image 10-7: Automatic assignment
4. Select the Select SSID dropdown menu and select the desired wireless network.
Tip: If the desired wireless network is not in the list or hidden by default, select “Add New SSID”. Fill in
the details of the network.
GUI – System Settings
To Next Page
Loading...
Need help?
General
