Need help?Do you have a question about the Barco UDX and is the answer not in the manual?
General| Light Source | Laser Phosphor |
|---|---|
| 3D Ready | Yes |
| Contrast Ratio | 2, 000:1 |
| Connectivity | HDMI, DisplayPort, HDBaseT, 3G-SDI |
| Throw Ratio | Varies by lens option |
Provides general safety guidelines and warnings for operating the projector.
Details critical instructions to prevent electrical shock, personal injury, and fire hazards.
Identifies key components and airflow of the projector for user familiarization.
Explains the procedure for turning the projector on and entering Ready mode.
Guides on connecting sources and selecting inputs for projecting an image.
Step-by-step instructions for installing batteries in the remote control unit.
Details the buttons and functions available on the Pulse Remote Control Unit.
Describes various communication ports like Ethernet, DMX, RS232/RS422, and USB.
Details the functionality and specifications of the Quad Combo Input Mk II board.
Provides a general overview of the projector's Graphic User Interface and first-time setup.
Explains how to navigate the projector's OSD menus using the remote control or keypad.
Instructions for selecting and displaying a single video input source.
Details how to configure settings for each projector input connector.
Guides on adjusting contrast, brightness, and saturation of the projected image.
Explains how to adjust the projector's sharpness for image clarity.
Describes how to select and configure different gamma types for image output.
Procedure for fine-tuning the projected image using motorized lens zoom and focus.
Covers digital image manipulation to compensate for screen distortion and create custom shapes.
Enables seamless transitions between channels in multi-projector setups for a single view.
Explains how to save current projector configurations for different use cases.
Guides on associating saved projector profiles with specific presets for quick recall.
Configuration options for broadcast address, projector address, and IR sensors.
Details wired and wireless IP address setup and network connection configurations.
Procedure to reset all projector settings to their default factory values.
Instructions for calibrating lens functions like focus, zoom, shift, and rotation.
Enables viewing a preview of the connected source when remotely accessing the projector.
Adjusts native projector colors, often requiring P7 calibration for accuracy.
Procedure to calibrate the projector's tilt sensor for accurate leveling and orientation.
Describes how to access and what information is available in the projector's status menu.
Provides instructions for updating the projector's firmware via USB or network.
Detailed procedure for cleaning the projector lens to maintain optical quality and prevent damage.
Technical specifications for the UDX-4K40 projector model.
Technical specifications for the UDX-4K32 projector model.
Technical specifications for the UDX-4K26 projector model.
Table detailing compatible video signals and resolutions supported by the projector.
Defines DMX functions, values, and actions for basic projector control.
Information on UK, EAC, FCC, and EMC compliance standards for the product.
Details compliance with China's Restriction of Hazardous Substances (RoHS) directive.
Details FCC compliance statements and RF radiation exposure information.
Details Industry Canada compliance statements and RF exposure limits.
To Next Page
