R5906112 /15 UDX146
Image 10–51 Example of the lens features menu
Depending on the mounted lens type, different functions may or may not be available such as:
• Focus
• Horizontal lens shift
• Vertical lens shift
• Zoom
2. To enable/disable a feature, click on the slider and drag it to the left to disable the feature or the right to
enable the feature.
When enabled, the slider becomes blue; when disabled, the slider is gray.
10.15 Factory reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Factory settings
The following settings are the default factory settings:
All Factory settings are listed, regardless of the projector type or chosen projector options. If an
option in this list is not present in your menu, the feature is not available or enabled on your
projector.
Option / Domain Setting Factory setting
DMX DMX Mode Basic
Start Channel 1
Auto power down
Art-net
XLR Connector
Disabled
GSM PIN State Unconfirmed
Illumination Power 100%
Constant light output (CLO) Disabled
ImageActuator 4K Actuator enabled / disabled
Enabled
Blend Blend / Mask size
Black Level
Disabled, all value to zero
Black Level Files Disabled.
GUI – System Settings
To Next Page
Loading...
Need help?
General
