Barco UDX

149R5906112 /15 UDX
Image 10–53 Example of the reset menu
2. In the Reset menu, select RESET ALL and confirm with OK.
How to reset one or more projector settings
1. In the main menu, select Settings → Maintenance → Reset.
Image 10–54 Settings menu, factory reset
The Reset menu is displayed.
Image 10–55 Example of the reset menu
2. Navigate to the checkbox next to the settings that need to be reset and press OK.
Multiple selections are possible.
3. Select RESET SELECTED and confirm with OK to reset all selected settings.
10.16 Lens Calibration
How to calibrate
1. In the main menu, Settings → Maintenance → Lens Calibration.
GUI – System Settings