Need help?Do you have a question about the Barco UDM Series and is the answer not in the manual?
Details the software revision number of the product.
Provides fundamental safety guidelines and warnings for projector operation and installation.
Outlines critical instructions to prevent electrical shock and other hazards during use.
Describes the meaning and location of various safety labels on the projector.
Details safety measures related to the projector's high-brightness light beam and hazard zones.
Explains safety considerations for projection systems that are fully enclosed.
Discusses safety aspects related to the projector's optical path and modifications.
Covers safety information pertaining to optional radio equipment modules.
Introduces the projector's components, layout, and orientation conventions.
Provides step-by-step instructions for powering the projector on and its initial states.
Guides users on connecting sources and selecting them for image projection.
Explains how to put the projector into standby mode and its behavior.
Details the procedure for safely powering down the projector from standby.
Instructions for installing batteries in the remote control unit.
Explains how to set the communication protocol for the remote control.
Guidance on pointing the Remote Control Unit (RCU) correctly for operation.
Provides a comprehensive overview of the buttons and their functions on the remote control.
Covers how to display and set addresses for the Remote Control Unit.
Details the procedure for using the XLR connector for wired control of the RCU.
Explains how to connect and use the mini-jack connector for RCU control.
Overview of the Input & Communication module and its components.
Describes the functions and operation of the projector's local keypad and LCD display.
Details the various communication ports and their uses on the projector.
Explains the meaning of different LED and button backlight statuses.
Information on the features and specifications of the Mk II input board.
Information on the features and specifications of the Mk I input board.
Details the functionality and specifications of the Quad DP 1.2 input.
Information regarding the SFP input board for fiber connectivity.
Provides a general overview of the projector's Graphic User Interface (GUI) status screens.
Explains how to navigate through the projector's On-Screen Display (OSD) menus.
Guides users on how to use the projector's built-in test pattern generator.
Instructions for selecting and displaying a single input source on the projector.
Covers configuring and displaying multiple sources in stitched layouts for a seamless image.
Explains how to configure settings for each input connector, such as color space and EDID.
Details how to adjust contrast, brightness, and saturation for the projected image.
Guide on how to enhance image sharpness for better detail and clarity.
Explains how to use gamma correction to enrich image contrast and detail in darker areas.
Information on selecting different gamma types, including standard, sRGB, and DICOM.
How to digitally adjust image position and size using the projector's features.
Covers custom color calibration using P7 Realcolor for multi-projector setups.
Instructions for configuring the projector's output resolution, especially for 4K models.
Guide on how to properly display High Dynamic Range (HDR) content using PQ settings.
Instructions for fine-tuning the projected image focus and zoom using the projector lens.
Details how to perform vertical and horizontal lens shifts for image positioning.
Procedure for forcing the projector lens back to its center position.
How to use the optional laser range finder to measure projection distance.
Instructions for controlling the projector's movement when mounted in a motorized rigging frame.
Setting the projector's physical installation orientation (e.g., front/ceiling).
Covers image warping techniques including On/Off, Screen Size, 4 Corners, Bow, Files, and Latency control.
Guides on creating seamless transitions and hiding image parts between projectors.
How to adjust laser power and enable Constant Light Output (CLO) mode.
Explains different methods for scaling images to fit the screen while respecting aspect ratio.
Covers setup and configuration for active stereoscopic 3D projection.
Explains the profile function for storing and recalling projector setups.
Lists the various settings that can be saved within a projector profile.
Steps for adjusting projector settings and creating a new profile.
Details how to configure wired network (LAN) connections, including DHCP and static IP.
Covers projector address settings and managing IR sensor functionality.
Instructions for changing the projector's hostname for easier network identification.
Explains projector control via DMX, including address, modes, and Art-Net.
How to enable and set output voltage for the front XLR connector.
Steps for configuring the projector with a SIM card and PIN code.
How to select between light and dark themes for the OSD display.
Options for changing units for temperature and distance measurements.
How to enable or disable specific lens functions for alignment and stability.
Adjusting backlight timeout or enabling Stealth Mode for the LCD panel.
Procedures for resetting projector settings to default or factory values.
Step-by-step guide for calibrating the projector's lens functions.
Manages projector brightness levels using FLEX technology and codes.
How to calibrate the projector's rigging frame for movement and rotation.
Steps to check and adjust the alignment of red, green, and blue color convergence.
Accessing hidden advanced settings, including color and statistics.
General overview of the status menu, detailing information about the projector.
Detailed instructions for updating the projector's software via network or USB.
Procedure for safely cleaning the projector's lens to maintain optical quality.
Steps for cleaning the projector's housing and external surfaces.
Technical specifications for the UDM 4K22 projector model.
Technical specifications for the UDM 4K15 projector model.
Technical specifications for the UDM W22 projector model.
Technical specifications for the UDM W15 projector model.
Details technical specifications for the projector's SDI input connectors.
Details technical specifications for the projector's HDMI input connectors.
Details technical specifications for the projector's HDBaseT input connectors.
Details technical specifications for the projector's DisplayPort 1.2 input connectors.
Details technical specifications for the projector's SFP input connectors.
A general overview of compatible video signals and timings supported by the projector.
Lists standard video formats and timings for SDI input connections.
Lists standard video formats and timings for HDMI 2.0 input connections.
Lists standard video formats and timings for DisplayPort 1.2 input connections.
Lists standard video formats and timings for HDBaseT input connections.
Illustrates the placement of input boards within the DMX chart context.
Details the basic DMX channel mapping for projector control functions.
Provides an extended DMX channel mapping for advanced projector control.
FCC compliance statements and RF exposure information for the wireless module.
Industry Canada compliance statements and RF exposure information for the wireless module.
Guidelines for the proper disposal of the projector and its batteries.
Statement regarding the projector's compliance with Turkish RoHS regulations.
Information on the restriction of hazardous substances in Barco products sold in China.
Declaration of the presence of restricted substances according to Taiwan RoHS standards.
Barco's contact details and information for finding local importers.
Lists the factory locations where Barco products are manufactured.
Defines Hazard Distance (HD) in relation to laser safety and exposure limits.
Explains the RS232 serial digital interface standard for communication.
Explains the RS422 serial digital interface standard for communication.
Defines transport latency as the added delay in the image processing chain.
Defines latency as the total time for a pixel to become visible on screen.
Explains the Dynamic Host Configuration Protocol for network address assignment.
To Next Page
General
