R5911443 /02 UDM 125
Image 10-23: Enter PIN code
2. Enter the 4 digits of the pin code and select APPLY and click OK.
10.7 Themes
About Themes
Themes are used to apply a predefined functionality to the OSD display. There are two options: light or dark
(default).
While the default theme is dark, all images in this manual are taken while using the light theme.
How to select a different interface theme
1. In the main menu, select System Settings →Themes.
Image 10-24: System Settings Menu — Themes.
2. In the themes menu, select the desired Theme.
You can choose one of the following: Light, or Dark.
10.8 Setting the measurement system
About the measurement systems
You can use this menu to change the default measurement systems. By default the metric system is used. But
you can choose between the following:
• Temperature: °C or °F
• Distance: meter, centimeter, feet or inch.
How to set a different metric system
1. In the main menu, select System Settings → Units.
GUI – System Settings
To Next Page
Loading...
Need help?
General
