Why does my Barco PHWU-81B Projector ask for a password?
If you see a password screen on your Barco Projector, it means the PASSWORD FUNCTION in the FEATURE menu has been set to DISPLAY INPUT. You need to enter the password or contact the person in charge of managing the projector to unlock it.
Why does my Barco PHWU-81B say 'HIGH TEMP WARNING'?
If the Barco Projector displays 'HIGH TEMP WARNING', it means the ambient temperature is too high or the intake/exhaust vents are blocked. Try to eliminate the causes of the rise in ambient temperature. Also, remove any objects blocking the intake or exhaust vents.
Why does my Barco PHWU-81B Projector power turn off by itself?
If your Barco Projector's power turns off unexpectedly, it might be due to blocked intake or exhaust vents, or the lamp may be deteriorating. First, remove any obstructions from the vents, then wait for the fans to stop, unplug the projector for 10 minutes, plug it back in, and press the power key. Also, ensure that AUTO POWER OFF is set to OFF. If the lamp is old, it might need replacing.
What to do if no image appears on Barco PHWU-81B screen?
If no image appears on the screen of your Barco Projector, try the following: * Press any key to cancel BLANK. * Ensure the lens cap is removed. * Allow up to 2 minutes for the lamp to light up; if it doesn't, wait a few minutes and try again. * If the projector was turned off before the lamp cooled down, wait for the fan to stop before turning it back on. * Set SCART INPUT in the FEATURE menu to OFF. * Check that the intake vent is clean. * Verify the cables connected to external devices are not broken. * If using an extension cable, test with the supplied cable. If images display correctly with the supplied cable, add an RGB signal amplifier to the extension cable.
Why don't the buttons on my Barco PHWU-81B work?
If the keys on your Barco Projector (except for the POWER key) don’t function, it's likely because the PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS. To resolve this, either cancel the password lock or contact the projector's administrator.
How to fix Barco PHWU-81B menu when it can't be used?
If the menu on your Barco Projector isn’t working, it could be due to microcomputer malfunction caused by noise. To fix this, turn off the lamp by pressing the POWER key, wait about 2 minutes, and then unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord back in, and try again.
How to fix distorted projected images on Barco PHWU-81B?
If your Barco Projector images are distorted, adjust the projector and the screen so that they are perpendicular to each other.
Why isn't my Barco PHWU-81B Projector remote control working properly?
This mark appears when ineffective operation is carried out. This isn’t a product malfunction. To improve remote control function with your Barco Projector: * Ensure the batteries are correctly loaded and not weak. * Check the remote control sensor isn’t exposed to direct sunlight or fluorescent light. * Use the remote control within its operational range, at least 10 cm away from the projector. * Verify the projector isn’t controlled by another device connected to the REMOTE 1 IN terminal. * Ensure the REMOTE 2 IN and OUT terminals are not in use.
Provides general safety and operating instructions that should be followed.
Lists safety precautions to prevent personal injury during projector use.
Outlines precautions to prevent fire hazards associated with projector use.
Details safety measures to prevent the risk of electrical shock.
Provides instructions and precautions to prevent damage to the projector.
Provides guidance on when and how to service the projector.
Explains how to operate the projector using the remote control.
Details the process and precautions for connecting the projector's power cord.
Explains how to connect the projector to a computer via analog and digital interfaces.
Provides instructions on how to project images, including preparation and projection steps.
Details the procedure for safely stopping the projector and powering it down.
Guides on correcting keystone distortion for trapezoidal images.
Details network settings such as projector name, IP configuration, and security.
Provides detailed image adjustment options like color enhancer, contrast, and sharpness.
Explains how to adjust image brightness and contrast using the advanced menu.
Details how to adjust the color saturation and tint of the projected image.
Guides on how to adjust the sharpness of the projected image.
Explains how to select or customize the white tone (color temperature) of the image.
Provides guidance on adjusting computer images for optimal display.
Details menu-based adjustments for computer-supplied images based on common symptoms.
Explains how to correct image distortion using Keystone, Cornerstone, and Curved modes.
Provides detailed steps for adjusting keystone distortion to correct trapezoidal images.
Details fine adjustment of image shape using the Cornerstone mode.
Covers IP settings, including DHCP, IP address, subnet mask, and default gateway.
Describes the password function for preventing unauthorized operation.
Explains how to supervise and control the projector using a computer via LAN.
Lists important warnings and precautions regarding lamp replacement.
Provides information on the recommended lamp replacement interval and indicators.
Details the procedure for replacing the projector lamp.
Explains how to reset the lamp operation time after replacing the lamp.
Provides instructions for cleaning the projector body, vents, and covers.
Details the correct procedure for cleaning the projector lens.
Troubleshooting guide for when no image is displayed on the screen.
Provides solutions for various image display issues like shaking, distortion, or color problems.
Addresses other common problems like menu issues, high temperature warnings, and remote control function.
General| Matrix size | 0.67 \ |
|---|---|
| Matrix type | DMD |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Projection technology | DLP |
| Contrast ratio (typical) | 2800:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WUXGA (1920x1200) |
| Projector brightness (economic mode) | 5450 ANSI lumens |
| Focal length range | - mm |
| Lamp power | 350 W |
| Lamps quantity | 2 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 4000 h |
| Full HD | No |
| Supported graphics resolutions | 1920 x 1200 (WUXGA) |
| BNC input ports | 5 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| I/O ports | SDI |
| Noise level | 44 dB |
| Noise level (economic mode) | 39 dB |
| Placement | Desktop, Ceiling |
| Product type | Large venue projector |
| Product color | Black, White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 910 W |
| Power consumption (standby) | 0.3 W |
| Power consumption (economy mode) | 690 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 30 - 90 % |
Weight and Dimensions| Depth | 660 mm |
|---|---|
| Width | 510 mm |
| Height | 263 mm |
| Weight | 21000 g |
| Package depth | 840 mm |
| Package width | 650 mm |
| Package height | 415 mm |
| Package weight | 26500 g |
To Next Page
