Barco RLM-W14 Service Manual

90 of 149
5-5. Firmware Downloads Procedure for Motor Board:
1. Go to RS-232 interface, run command “op dlmo” and press “enter”.
2. Run " Flash Magic”
3. Set “Select Device” to LPC2132
4. Set Com port, Baud Rate, Oscillator.
5. Click “Browse to choose file.
6. Click “Start”

Barco RLM-W14 Specifications

General

Brand	Barco
Model	RLM-W14
Category	Projector
Language	English