Barco RLM W8 - Page 44

To Next Page

To Previous Page

- 44 -

3-6. Key in the IP address and followed by “/firmwareUpdate.htm” on the URL box as below to

activate the firmware update procedure

http://192.168.0.100/firmwareUpdate.htm

And click the “Update” button to start the firmware upgrade process.

3-7. The following message will be shown on the display, click “Continue” button to proceed

3-8. Press the “Browse” button and locate the firmware (binary code) to be upgraded. Then

press the “Upgrade” button to proceed the download process.

Other manuals for Barco RLM W8