Barco RLM W8 - Page 58

- 58 -
Barco RLM W8 Operation Commands
Command
Item
Operation Commands Values Notes
5-28 scen.blk.left
scen.blk.right
= ? + - 0 ~ 32 Note1 ; Note 17 multiple
of 4;the adjustable range
and 4-multiple
restrictions are per Geo
Semi’specification.
5-29 scen.red = ? + - 0 ~ 32 Note1
5-30 scen.green = ? + - 0 ~ 32 Note1
5-31 scen.blue = ? + - 0 ~ 32 Note1
5-32 scen.all = ? + - 0 ~ 32 Note1;Note18
5-33 scen.reset (execute) Note1
5-34 scen.adl = ? 0 = Off
1 = On
Note1
6-1 ir.addr = ? 0 = remote code 1
1 = remote code 2
6-2 eco.net.pow = ? 0 = Off (RJ45 Power On)
1 = On (RJ45 Power Off)
6-3 proj.ctrl = ? 0 = rs232
1 = network
Note12
6-4 net.ipaddr = ? <string>
6-5 net.subnet = ? <string>
6-6 net.gateway = ? <string>
6-7 net.dhcp = ? 0 = Off
1 = On
6-8 menu.pos = ? 0 = Top left
1 = Top right
2 = Bottom left
3 = Bottom right
4 = center
Note1
6-9 startup.logo = ? 0 = Off
1 = On
6-10 startup.chime = ? 0 = Off
1 = On