Barco RLM W8 - Page 64

- 64 -
Barco RLM W8 Operation Commands
Command
Item
Operation Commands Values Notes
0.6 errcode ?
0=ErrMsgOverTempInlet:
1=ErrMsgOverTempDMD:
2=ErrMsgOverTempLamp1:
3=ErrMsgOverTempLamp2:
4=ErrMsgOverTempBallast1:
5=ErrMsgOverTempBallast2:
6=ErrMsgFanInitError:
7=ErrMsgFan1RotateError:
8=ErrMsgFan2RotateError:
9=ErrMsgFan3RotateError:
10=ErrMsgFan4RotateError:
11=ErrMsgFan5RotateError:
12=ErrMsgFan6RotateError:
13=ErrMsgFan7RotateError:
14=ErrMsgFan8RotateError:
15=ErrMsgDMDInitFail:
16=ErrMsgLampInitFail:
17=ErrMsgLampLitFail:
18=ErrMsgBallastUartError:
19=ErrMsgExGpioFail:
20=ErrMsgInterLockOpen:
21=ErrMsgGF9450NoResponse:
22=ErrMsgSystemI2cFail:
23=ErrMsgSoftwareI2cFail:
24=ErrMsgEepromFail:
25=ErrMsgEdidFail:
26=ErrMsgEepVersionFail:
27=ErrMsgRstGennum:
28=ErrMsgFan9RotateError:
29=ErrMsgFan10RotateError:
30=ErrMsgFan11RotateError:
31=ErrMsgFan12RotateError:
32= ErrMsgLamp2LitFail:
33= ErrMsgBallast2UartError:
34=ErrMsgGtInletTp:
35=ErrMsgGtDmdTp,
36=ErrMsgInletTempSensorFail,
37=ErrMsgDMDTempSensorFail,
38=ErrMsgGeoSystemFail
0.7 f.search = ? 0 = F1 Search
1 = F2 Search (default)
REMARK: An input command will get back with “NA” when the input command is “Not Applicable” in some
specific conditions.
Note1: Not applicable in standby mode.
Note2: Not applicable in standby mode or without signal locked.
Note3: Not applicable when picture mute is on.
Note4: Only valid when source is one of Composite, S-Video and RGB-S.
Note5: Native aspect ratio is not applicable when zoom is set to “Zoom”, Letterbox aspect ratio is not applicable
when the input format is one of formats as listed in appendix 2.
Note6:
Selection “Zoom” is not applicable when aspect ratio is set to Native.
Note7:
Only applicable when source is one of RGB D-15, YUV1 and RGBHV/YUV2.
Note8: Not applicable when color space is set to custom.