Bard FH085D36D - Figure 4 Typical Installation Requirement; Table 5 Electrical Data

Manual 2100-392
Page 7
TABLE 5
ELECTRICAL DATA
ledoMHP-ZH-stloV
latoT
spmA
rotoMrewolBrotoMrenruB
muminiM
tiucriC
yticapmA
emiT.xaM
esuFyaleD
RCAHro
rekaerBtiucriC
PHALFPHALF
D63D580HF1-06-5112.93/15.77/17.15151
D84D011HF1-06-5112.212/15.017/17.16102
D06D011HF1-06-5112.414/35.217/17.19102
D63D580FLF1-06-5113.713/16.57/17.15151
D63D580RLF1-06-5113.713/16.57/17.15151
D84D011FLF1-06-5112.212/15.017/17.16102
D84D011RLF1-06-5112.212/15.017/17.16102
D06D041RLF1-06-5112.414/35.217/17.19102
D63D580CF1-06-5113.73/16.57/17.15151
MIS-1335
FIGURE 4
TYPICAL INSTALLATION REQUIREMENTS
FRONT FLUE LO-BOY MODEL SHOWN
NOTE: The chimney must be lined with a high temperature noncorrosive material that complies with the local
codes, or in their absence with Standard for Chimneys and Vents, NFPA211. Also see section on Venting
in these instructions.