Instruction, Use and Maintenance Manual
EN-IST-BBZK-0418
4 Checking / Unpacking / Lifting
1. CHECK:
- Check the valve show no signs of damage caused during transport
and that it corresponds with the order;
- Check the inside of the valve.
2. UNPACKING:
The valve packaging is made up of cardboard, wood and plastic.
The valve is mainly made up of metal materials. The gaskets are
usually made from elastomers. Disposal must be in compliance with
local legislation.
3. VALVE LIFTING:
Take care as to the type of valve you are handling. Based on the size
there are two different lifting procedures.
CAUTION!
Before lifting the valve, make sure there are no disassembled or
separate valve parts which could fall off causing injury to persons
and damage to the valve.
BBZK
Size
DN
Weight
Kg
10-25 A
40 A
50 A
65 A
80 B
100 B
125 B
150 B
Weight between 25 kg and
50 kg
Weight up to 25 kg
A
B
CAUTION!
The figures above are used purely to represent the methods and procedures for hoisting the valves.
Bardiani Valvole S.p.A. declines all liability for any damage to things and/or injuries to persons caused
by improper and/or incorrect hoisting of the valve.
10
To Next Page
Loading...
Need help?
General
