To Next PageTo Next Page
Need help?Do you have a question about the barfield TT-1000A and is the answer not in the manual?
General| Brand | barfield |
|---|---|
| Model | TT-1000A |
| Category | Test Equipment |
| Language | English |
Contact details for technical support inquiries.
Limits on warranty and liability information.
Instructions for validating warranty and receiving updates.
How to obtain updated information from the company website.
Disclaims express and implied warranties.
Limits vendor liability for damages and consequential losses.
Details the history of document revisions and their changes.
Instructions to contact manufacturer for approved repair facilities.
Outlines the purpose of this publication for the TT-1000A.
Details the TT-1000A's capabilities, design, and features.
Explains the operation of the various switches and controls on the TT-1000A.
Guidance on preparing the TT-1000A, including protective circuits.
Procedures for installing, removing, and checking the TT-1000A batteries.
Critical safety guidelines and warnings for operating the TT-1000A.
Method for testing a hot engine and mitigating temperature-related errors.
Steps to disconnect leads, connect clips, and measure system resistance.
Steps to disconnect wires, connect clips, and measure thermocouple resistance.
Steps for disconnecting leads and performing insulation resistance tests.
Steps for testing indicators, including connecting clips and comparing readings.
Describes Potentiometric/Servo indicators and lead resistance relevance.
Steps for measuring system lead resistance for these indicators.
Steps for measuring thermocouple resistance for these indicators.
Steps for performing insulation tests on these indicators.
Steps for conducting the indicator test and comparing readings.
Steps for testing temperature measurement, including cautions and display interpretation.
Details the physical dimensions and weight of the TT-1000A.
Outlines temperature measurement, lead resistance, insulation, and simulated resistance specs.
Lists the measurement and simulation capabilities of the TT-1000A.
States the one-year recertification requirement for the TT-1000A.
Recommendations for unpacking and inspecting the TT-1000A upon receipt.
Guidelines for packing the TT-1000A for reshipment.
Steps for storing the TT-1000A, including battery removal and environmental conditions.
