barigo E7S - Deleting Readings

BARIGO E7/E7S
40
available. It will not be available until a new time measurement with
lap times is started and completed again.
3.6.2 Deleting readings
You can only delete the stopwatch information by stopping timing by
pressing the S2 button. Keep the S1 button pressed down to delete
all of the stopwatch readings.
Hint
You can work with two end times when you do without the meas-
urement of the split times. For example, when runner 1 reaches the
finish line, press the S1 button, and when runner 2 finishes, press
the S2 button. "LAP-01" is the finish time for runner 1 and the
stopped overall time is the finish time for runner 2.