Barko 595 ML - Battery Disconnect Switch; Right Track Travel Foot Pedal; Left Track Travel Foot Pedal

page 20page 20
page 20page 20
page 20
595ML CRL
800-00050
CONTROL FUNCTIONS CONTINUED...
BATTERY DISCONNECTBATTERY DISCONNECT
BATTERY DISCONNECTBATTERY DISCONNECT
BATTERY DISCONNECT
SWITCHSWITCH
SWITCHSWITCH
SWITCH
Located on side of shrouding behind cab door.
Breaks positive circuit between battery and all
points on machine.
This switch should be used to disconnect battery
circuit when transporting machine and whenever
false starts or electrical damage need be
prevented.
Turn switch to OFF to disconnect battery circuit.
Turn switch to ON to connect battery circuit.
WARNING WARNING
WARNING WARNING
WARNING
If welding is to be done on machine:If welding is to be done on machine:
If welding is to be done on machine:If welding is to be done on machine:
If welding is to be done on machine:
1)1)
1)1)
1)
Get factory authorization.Get factory authorization.
Get factory authorization.Get factory authorization.
Get factory authorization.
2)2)
2)2)
2)
Disconnect battery.Disconnect battery.
Disconnect battery.Disconnect battery.
Disconnect battery.
3)3)
3)3)
3)
Disconnect electronic throttle.Disconnect electronic throttle.
Disconnect electronic throttle.Disconnect electronic throttle.
Disconnect electronic throttle.
4)4)
4)4)
4)
Disconnect radio.Disconnect radio.
Disconnect radio.Disconnect radio.
Disconnect radio.
Damage to components will occur if theDamage to components will occur if the
Damage to components will occur if theDamage to components will occur if the
Damage to components will occur if the
above procedures are not followed.above procedures are not followed.
above procedures are not followed.above procedures are not followed.
above procedures are not followed.
RIGHTRIGHT
RIGHTRIGHT
RIGHT
TRACKTRACK
TRACKTRACK
TRACK
LEFTLEFT
LEFTLEFT
LEFT
TRACKTRACK
TRACKTRACK
TRACK
LEFTLEFT
LEFTLEFT
LEFT
TRACKTRACK
TRACKTRACK
TRACK
RIGHTRIGHT
RIGHTRIGHT
RIGHT
TRACKTRACK
TRACKTRACK
TRACK
RIGHT TRACK TRAVEL FOOTRIGHT TRACK TRAVEL FOOT
RIGHT TRACK TRAVEL FOOTRIGHT TRACK TRAVEL FOOT
RIGHT TRACK TRAVEL FOOT
PEDALPEDAL
PEDALPEDAL
PEDAL
Push pedal with toe of foot to move right
track forward. Push pedal with heel of foot
to move right track in reverse.
NOTE:NOTE:
NOTE:NOTE:
NOTE: The track pedals are spring loaded
to neutral position when foot pressure is
released. With pedals in neutral position, the
tracks will gradually come to a stop.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Pedals can be moved in opposite
directions for turning sharply.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Parking brake is automatically applied
when pedal is not pressed, automatically
removed when pedal is pressed.
LEFT TRACK TRAVEL FOOTLEFT TRACK TRAVEL FOOT
LEFT TRACK TRAVEL FOOTLEFT TRACK TRAVEL FOOT
LEFT TRACK TRAVEL FOOT
PEDALPEDAL
PEDALPEDAL
PEDAL
Push pedal with toe of foot to move the left
track forward. Push pedal with heel of foot
to move the left track in reverse.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Operate both pedals simultaneously
to move the machine fully forward or
reverse.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Parking brake is automatically
applied when pedal is not pressed,
automatically removed when pedal is
pressed.
OFF
ON
CAB
SHROUDING