page 39page 39
page 39page 39
page 39
595ML CRL
800-00050
8 hours8 hours
8 hours8 hours
8 hours
DailyDaily
DailyDaily
Daily
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIRED
Fan and DrivebeltsFan and Drivebelts
Fan and DrivebeltsFan and Drivebelts
Fan and Drivebelts - Check for looseness
and wear. Tighten or replace as needed.
Operator's PlatformOperator's Platform
Operator's PlatformOperator's Platform
Operator's Platform - Clean area of debris,
tools, rags, water, ice, and snow.
Fuel Tank Fuel Tank
Fuel Tank Fuel Tank
Fuel Tank - Check level and fill if necessary.
Engine Crankcase Oil Engine Crankcase Oil
Engine Crankcase Oil Engine Crankcase Oil
Engine Crankcase Oil - Check level.
Engine RadiatorEngine Radiator
Engine RadiatorEngine Radiator
Engine Radiator - Check coolant level and
fill if necessary. Inspect exterior for dirt and
debris and clean if necessary.
Hoses, Connections, Cylinders Hoses, Connections, Cylinders
Hoses, Connections, Cylinders Hoses, Connections, Cylinders
Hoses, Connections, Cylinders - Inspect for
leaks and damage. Tighten, repair, or
replace parts if necessary.
Pump DrivePump Drive
Pump DrivePump Drive
Pump Drive - Check fluid level.
Swing Motor GearboxSwing Motor Gearbox
Swing Motor GearboxSwing Motor Gearbox
Swing Motor Gearbox - Check fluid level.
Engine Air CleanerEngine Air Cleaner
Engine Air CleanerEngine Air Cleaner
Engine Air Cleaner - Inspect & replace
element,if needed.
Hydraulic ReservoirHydraulic Reservoir
Hydraulic ReservoirHydraulic Reservoir
Hydraulic Reservoir - check level and quality
of oil.
Hydraulic Oil Reservoir Hydraulic Oil Reservoir
Hydraulic Oil Reservoir Hydraulic Oil Reservoir
Hydraulic Oil Reservoir - On new machines
the oil must be changed after the first 50 hours,
and then every 1000 hours after that.
Hydraulic Oil FilterHydraulic Oil Filter
Hydraulic Oil FilterHydraulic Oil Filter
Hydraulic Oil Filter - On new machines the
filter element should be replaced first at 50
hrs. and then at 400 hrs. thereafter.
Engine ShroudingEngine Shrouding
Engine ShroudingEngine Shrouding
Engine Shrouding - Clean and inspect.
SERVICE SCHEDULESERVICE SCHEDULE
SERVICE SCHEDULESERVICE SCHEDULE
SERVICE SCHEDULE
FittingsFittings
FittingsFittings
Fittings - Lubricate as shown on Lubrication
Points. Use a multi-purpose grease.
Bolts/Nuts Bolts/Nuts
Bolts/Nuts Bolts/Nuts
Bolts/Nuts - Visually inspect for wear or
damage.
Control Lever LinkageControl Lever Linkage
Control Lever LinkageControl Lever Linkage
Control Lever Linkage - Lubricate.
Bolts/NutsBolts/Nuts
Bolts/NutsBolts/Nuts
Bolts/Nuts - Check for proper
torque every 50 hours. Retorque if necessary.
Battery Battery
Battery Battery
Battery - Clean and coat posts with grease.
Check electrolyte level and fill if necessary.
Engine Oil Filter Engine Oil Filter
Engine Oil Filter Engine Oil Filter
Engine Oil Filter - Replace.
Hydraulic Oil Cooler and RadiatorHydraulic Oil Cooler and Radiator
Hydraulic Oil Cooler and RadiatorHydraulic Oil Cooler and Radiator
Hydraulic Oil Cooler and Radiator - Clean.
Hydraulic Oil Reservoir Breather Hydraulic Oil Reservoir Breather
Hydraulic Oil Reservoir Breather Hydraulic Oil Reservoir Breather
Hydraulic Oil Reservoir Breather - Replace.
Hydraulic CollectorHydraulic Collector
Hydraulic CollectorHydraulic Collector
Hydraulic Collector - Check mounting bolts.
AccumulatorsAccumulators
AccumulatorsAccumulators
Accumulators - Check pressure and maintain
at 1200 PSI.
50 hours50 hours
50 hours50 hours
50 hours
WeeklyWeekly
WeeklyWeekly
Weekly
100 hours100 hours
100 hours100 hours
100 hours
MonthlyMonthly
MonthlyMonthly
Monthly
400 hours400 hours
400 hours400 hours
400 hours
2 Months2 Months
2 Months2 Months
2 Months
1000 hours1000 hours
1000 hours1000 hours
1000 hours
6 Months6 Months
6 Months6 Months
6 Months
YearlyYearly
YearlyYearly
Yearly
Swing Motor GearboxSwing Motor Gearbox
Swing Motor GearboxSwing Motor Gearbox
Swing Motor Gearbox - On new machines
the fluid should be changed first at 50
hrs. and then every 400 hours thereafter.
To Next Page
Loading...
