EasyManua.ls Logo

Barko 595 ML - Page 40

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
page 40page 40
page 40page 40
page 40
595ML CRL
800-00050
Hydraulic ReservoirHydraulic Reservoir
Hydraulic ReservoirHydraulic Reservoir
Hydraulic Reservoir
- -
- -
- Replace oil and clean
suction screens.
Entire Loader - Entire Loader -
Entire Loader - Entire Loader -
Entire Loader - Steam clean, inspect for
stress, wear, cracks, damage, and loose parts.
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIRED
Pump Drive Pump Drive
Pump Drive Pump Drive
Pump Drive - Replace fluid.
Hydraulic Oil FiltersHydraulic Oil Filters
Hydraulic Oil FiltersHydraulic Oil Filters
Hydraulic Oil Filters - Replace elements every
400 hours, after initial change at 50 hours on a
new machine.
SERVICE SCHEDULE CONTINUED...
Pilot Filters in Valve BanksPilot Filters in Valve Banks
Pilot Filters in Valve BanksPilot Filters in Valve Banks
Pilot Filters in Valve Banks - Remove, inspect
and clean.
Air Conditioner Air Intake Filter Air Conditioner Air Intake Filter
Air Conditioner Air Intake Filter Air Conditioner Air Intake Filter
Air Conditioner Air Intake Filter - Replace.
8 hours8 hours
8 hours8 hours
8 hours
DailyDaily
DailyDaily
Daily
50 hours50 hours
50 hours50 hours
50 hours
WeeklyWeekly
WeeklyWeekly
Weekly
100 hours100 hours
100 hours100 hours
100 hours
MonthlyMonthly
MonthlyMonthly
Monthly
400 hours400 hours
400 hours400 hours
400 hours
2 Months2 Months
2 Months2 Months
2 Months
1000 hours1000 hours
1000 hours1000 hours
1000 hours
6 Months6 Months
6 Months6 Months
6 Months
YearlyYearly
YearlyYearly
Yearly
Swing Motor GearboxSwing Motor Gearbox
Swing Motor GearboxSwing Motor Gearbox
Swing Motor Gearbox - Replace fluid. On new
machines the fluid should be changed first at 50
hrs. and then every 400 hours thereafter.
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIRED
8 HRS.8 HRS.
8 HRS.8 HRS.
8 HRS.
DAILYDAILY
DAILYDAILY
DAILY
50 HRS.50 HRS.
50 HRS.50 HRS.
50 HRS.
WEEKLYWEEKLY
WEEKLYWEEKLY
WEEKLY
100 HRS.100 HRS.
100 HRS.100 HRS.
100 HRS.
MONTHLYMONTHLY
MONTHLYMONTHLY
MONTHLY
400 HRS.400 HRS.
400 HRS.400 HRS.
400 HRS.
2 MONTHS2 MONTHS
2 MONTHS2 MONTHS
2 MONTHS
1000 HRS.1000 HRS.
1000 HRS.1000 HRS.
1000 HRS.
6 MONTHS6 MONTHS
6 MONTHS6 MONTHS
6 MONTHS
Tracks - Tracks -
Tracks - Tracks -
Tracks - Inspect for damaged shoes/missing or
loose bolts. Check master link for missing/loose
bolts. Inspect links for missing/leaking oil plugs.
Sprockets -Sprockets -
Sprockets -Sprockets -
Sprockets - Check for wear/missing or broken
segments. Check for loose or missing hardware.
Recoil Mechanism GuardRecoil Mechanism Guard
Recoil Mechanism GuardRecoil Mechanism Guard
Recoil Mechanism Guard - Check for damage and
loose or missing bolts.
Track Roller Guard Track Roller Guard
Track Roller Guard Track Roller Guard
Track Roller Guard - Check for damage and
loose or missing bolts.
Idlers/RollersIdlers/Rollers
Idlers/RollersIdlers/Rollers
Idlers/Rollers - Check for wear/leaks near shaft.
Final Drive Final Drive
Final Drive Final Drive
Final Drive - Change oil after first 100 hours of
service, - every 1000 hours after that. Check oil
level every 100 hours.
Track Idler YokeTrack Idler Yoke
Track Idler YokeTrack Idler Yoke
Track Idler Yoke - Ensure idler yoke fully extended.
Track Roller Frame Track Roller Frame
Track Roller Frame Track Roller Frame
Track Roller Frame - Check for wear/cracks/broken
welds.
Final DriveFinal Drive
Final DriveFinal Drive
Final Drive - Drain, then fill with oil. Replace seals/
gaskets.
CRAWLER LOWER SERVICE SCHEDULECRAWLER LOWER SERVICE SCHEDULE
CRAWLER LOWER SERVICE SCHEDULECRAWLER LOWER SERVICE SCHEDULE
CRAWLER LOWER SERVICE SCHEDULE
NOTE:NOTE:
NOTE:NOTE:
NOTE: Use the intervals on Service Schedule when operating in normal conditions. Service the
machine at shorter intervals when operating in very hot, cold, dusty, or humid conditions.

Related product manuals