To Next PageTo Next PageWhat to do if Barnstead International Laboratory Equipment displays message E11?
If your Barnstead International Laboratory Equipment displays message E11, it could indicate several issues: * A locked rotor condition: Try to free the locked rotor. * Motor failure: You may need to replace the motor. * Motor circuit failure: Consider replacing the control board. * Motor sensor failure: Replacing the motor sensor might be necessary.
What to do if Barnstead International Laboratory Equipment displays message E02?
If your Barnstead International Laboratory Equipment displays message E02, it could be due to: * A thermocouple short circuit: Replacing the element assembly (attached to the thermocouple) might help. * Element failure: In this case, replace the element. * Element circuit failure: Try replacing the control board.
General| Brand | Barnstead International |
|---|---|
| Model | Cimarec series |
| Category | Laboratory Equipment |
| Language | English |
Details visual alert signals used to indicate warnings, cautions, and notes for user safety.
Provides critical safety warnings regarding electrical shock, personal injury, and material hazards.
Continues safety warnings and usage guidelines for operating the equipment safely.
Outlines temperature ranges, heat-up times, and temperature stability for various models.
Details the stirring speed range, dial positions, and speed stability.
Specifies the operating and storage environmental requirements for the equipment.
Lists technical standards and directives that the product conforms to for CE models.
Briefly describes the intended applications and general use of the stirring hot plate.
Instructions for safely removing the unit from its packaging and verifying contents.
Guidance on proper placement and connection of the stirring hot plate for safe operation.
Instructions on how to adjust and control the stirring speed using the designated knob.
Details on how to set and control the heating temperature via the control knob.
Tips for optimizing the heating process when working with larger volumes of liquid.
Guidance on heating smaller volumes and potential issues like temperature overshoot.
Specific considerations and precautions for heating metal vessels or using sand baths.
Procedures for cleaning the exterior surfaces of the stirring hot plate.
Explanation of displayed error codes, their causes, and recommended solutions.
