To Next PageTo Next PageWhat to do if Barnstead International SP131325 displays message E11?
If your Barnstead International Laboratory Equipment displays message E11, it could indicate several issues: * A locked rotor condition: Try to free the locked rotor. * Motor failure: You may need to replace the motor. * Motor circuit failure: Consider replacing the control board. * Motor sensor failure: Replacing the motor sensor might be necessary.
What to do if Barnstead International SP131325 Laboratory Equipment displays message E02?
If your Barnstead International Laboratory Equipment displays message E02, it could be due to: * A thermocouple short circuit: Replacing the element assembly (attached to the thermocouple) might help. * Element failure: In this case, replace the element. * Element circuit failure: Try replacing the control board.
How to fix error E12 on Barnstead International SP131325?
If your Barnstead International Laboratory Equipment displays message E12, replace the control board.
Explains warning, caution, and note signals used in the manual.
Details electrical shock and personal injury prevention measures.
Details temperature range, heat-up time, and stability for ceramic top plates.
Outlines speed range, dial positions, and stability for stirring function.
Guides users on adjusting the stirring speed using the dedicated knob.
Details how to set and control the top plate temperature using the control knob.
Lists displayed error codes, their causes, and recommended solutions.
General| Product Type | Water Purification System |
|---|---|
| Model | SP131325 |
| Brand | Barnstead International |
| TOC Level | < 5 ppb |
| Resistivity | 18.2 MΩ-cm |
