What to do if Barnstead International Laboratory Equipment displays message E11?
If your Barnstead International Laboratory Equipment displays message E11, it could indicate several issues: * A locked rotor condition: Try to free the locked rotor. * Motor failure: You may need to replace the motor. * Motor circuit failure: Consider replacing the control board. * Motor sensor failure: Replacing the motor sensor might be necessary.
What to do if Barnstead International SP131630-33 Laboratory Equipment displays message E02?
If your Barnstead International Laboratory Equipment displays message E02, it could be due to: * A thermocouple short circuit: Replacing the element assembly (attached to the thermocouple) might help. * Element failure: In this case, replace the element. * Element circuit failure: Try replacing the control board.
How to fix error E12 on Barnstead International SP131630-33 Laboratory Equipment?
If your Barnstead International Laboratory Equipment displays message E12, replace the control board.
Provides critical warnings for electrical shock and personal injury to ensure safe usage.
Details how to adjust the stirring speed using the STIR knob and the feedback control mechanism.
Explains how to set temperature setpoints, the role of the digital display, and the 'CAUTION - HOT TOP' light.
Lists displayed error messages, their causes, and recommended solutions for technical service.
General| Type | Water Purification System |
|---|---|
| Model | SP131630-33 |
| Brand | Barnstead International |
| TOC Level | < 5 ppb |
| Resistivity | 18.2 MΩ·cm |
To Next Page
