What to do if Barnstead International Laboratory Equipment displays message E11?
If your Barnstead International Laboratory Equipment displays message E11, it could indicate several issues: * A locked rotor condition: Try to free the locked rotor. * Motor failure: You may need to replace the motor. * Motor circuit failure: Consider replacing the control board. * Motor sensor failure: Replacing the motor sensor might be necessary.
What to do if Barnstead International Laboratory Equipment displays message E02?
If your Barnstead International Laboratory Equipment displays message E02, it could be due to: * A thermocouple short circuit: Replacing the element assembly (attached to the thermocouple) might help. * Element failure: In this case, replace the element. * Element circuit failure: Try replacing the control board.
How to fix error E12 on Barnstead International SP131320-33?
If your Barnstead International Laboratory Equipment displays message E12, replace the control board.
Provides crucial safety advice regarding electrical shock and personal injury.
Step-by-step guide to adjust and control the stirring function.
Instructions for adjusting and controlling the heating temperature.
Explains error messages and their potential causes and solutions.
General| Brand | Barnstead International |
|---|---|
| Model | SP131320-33 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
