7
GENERAL SPECIFICATIONS
Environmental Conditions
Operating: 17°C to 27°C; 20% to 80% relative humidity, non-condensing. Installation
Category II (overvoltage) in accordance with IEC 664. Pollution degree 2 in
accordance with IEC 664.
Altitude Limit: 2,000 meters.
Storage: -25°C to 65°C; 20% to 80% relative humidity
Declaration of Conformity
Barnstead International hereby declares under its sole responsibility that this product con-
forms with the technical requirements of the following standards (220-240 Volt Models
Only):
EMC: EN 50081-1 Generic Emissions Standard
EN 50082-2 Generic Immunity Standard
Safety: EN 61010-1 Safety Requirements for Electrical Equipment
for Measurement, Control and Laboratory Use;
Part I: General Requirements
EN 61010-2-010 Part II: Particular Requirements for
Laboratory Equipment for the Heating of Materials
per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
To Next Page
Loading...
