Bartec HSB+ - Installation on Tanks and Vessels

21-5400-7D0001/-
05/2023-EHT-466854
Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 31 / 40
 Installation on pumps:
Installation on tanks and vessels
 For tank diameters of up to 2 m the trace heater is attached using polyester fixing straps and tensioning buckles.
 To fasten the fixing straps thread the polyester straps through the tensioning buckle as shown and pull the ends of the straps.
16
17