Baseline 12-0286 - Operational Procedures; To Convert Unit; To Reset and Retest; Quick Test Mode

5
TO CONVERT UNIT
TO RESET AND RETEST
QUICK TEST MODE
Press “ON/SET” 3 seconds to switch off. Auto shut-off occurs if LCD shows the same reading
for 20 seconds.
TO SAVE TEST RESULT
After saving, dynamometer will return to testing mode.
READY FOR TESTING
TO CONVERT UNIT BETWEEN Kg & Lb
TO CONVERT UNIT BETWEEN Kg & Lb
SHOW MAX. GRIP
VALUE IN THE TEST
PRESS
PRESS
SHOW MAX. GRIP
VALUE IN THE TEST
RESET TO ZERO AND
START ANOTHER TEST
PRESS
SHOW MAX. GRIP VALUE IN THE TEST
HOLD THE HANDLE TIGHTLY AND RELEASE
WAIT UNTIL LCD
SHOWS “O.O”
POWER OFF
PRESS
READY FOR TESTING
SHOW MAX. GRIP VALUE IN THE TEST
PRESS
GRIP VALUE SAVED