EasyManua.ls Logo

BASENGREEN BR-RM-LV 6KWH - 1. Preface; Safety Instructions

BASENGREEN BR-RM-LV 6KWH
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BASENGREEN, YOUR RELIABLE POWER
01
1. Preface
This manual will provide detailed product information and installation instructions for users of the
wall-mounted series products of SHENZHEN BASENGREEN TECHNOLOGY CO.LTD (hereinafter
referred to as BASENGREEN). Please read this manual carefully, and put this manual in a place where
you can install, operate, and obtain it conveniently.
The safety precautions mentioned in the manual do not represent all the safety matters that should be
observed, but are only supplementary to the safety precautions. When installing, operating, and
maintaining equipment, local safety regulations and norms should be followed. Only trained profession-
als can install, operate and maintain equipment. Our company does not assume any responsibility for
losses caused by violation of general safety operation requirements or violation of safety standards for
the design, production, and use of equipment. Installation and maintenance personnel must have
high-voltage and AC power operation skills. When installing, operating, and maintaining equipment,
they must not wear any conductive objects, such as watches, bracelets, bracelets, and rings, and
prevent moisture from entering the equipment.
High Voltage Danger
Safety Instructions
The high-voltage power supply provides power for the operation of the equipment. Direct contact or
indirect contact with high-voltage power supply through wet objects will cause fatal danger.
Use Professional Tools
Always use professional tools instead of personal tools when working with high voltage and AC power
Anti-static
The static electricity generated by the human body will damage the electrostatic sensitive
components on the board. Before touching the plug-in, circuit board or chip, make sure to take proper
anti-static measures.
Operate Attention
The power must be cut off first before operation, do not hot-line work.
DC short circuit Danger
The power system provides a DC-regulated power supply, and a DC short circuit will damage the
equipment and cause personal injury.

Related product manuals