BASENGREEN, YOUR RELIABLE POWER
07
6. Installation and configuration
6.1 Packing
a. After receiving the battery, open the box to check the battery surface if get any broken, crack,s or
other bad phenomena; if get that, please do not install, and need to contact the supplier, and wait
for the supplier's reply before proceeding to the next step.
b. Please ensure that the following items are included in the packaging:
6.2 Installation Diagram
Battery*1
Bracket Mounting Cabinet Mounting
M8*12mm
combination screws*4
Parallel
communication cable*1
Inverte
communication cable*1
Upper system
communication cable*1
To Next Page
Loading...